IMAP 函数
在线手册:中文  英文

imap_fetchbody

(PHP 4, PHP 5)

imap_fetchbodyFetch a particular section of the body of the message

说明

string imap_fetchbody ( resource $imap_stream , int $msg_number , string $section [, int $options = 0 ] )

Fetch of a particular section of the body of the specified messages. Body parts are not decoded by this function.

参数

imap_stream

imap_open() 返回的 IMAP 流。

msg_number

The message number

section

The part number. It is a string of integers delimited by period which index into a body part list as per the IMAP4 specification

options

A bitmask with one or more of the following:

  • FT_UID - The msg_number is a UID
  • FT_PEEK - Do not set the \Seen flag if not already set
  • FT_INTERNAL - The return string is in internal format, will not canonicalize to CRLF.

返回值

Returns a particular section of the body of the specified messages as a text string.

参见


IMAP 函数
在线手册:中文  英文

用户评论:

red dot ender at yahoo dot com (2013-01-08 13:29:49)

I had some problems with the german umlauts from a gmail fetched text. I lost an hour trying to find a solution. 

Hopefully this helps someone in need :)

<?php
$text 
trimutf8_encodequoted_printable_decode(
                        
imap_fetchbody$this->inbox$emailNo$section ) ) ) );

$section was previously defined:
$section = empty( $attachments ) ? 1.1;
?>

alejandro dot anv at gmail dot com (2012-08-10 13:55:43)

Winmail.dat (TNEF content) may be processed using the function included in roundcubemail. 

Just include the file program/lib/tnef_decoder.php from roundcubemail, extract the contents of the winmail.dat file (application/tnef) and use the following code:

<?php
require_once('path_to/tnef_decoder.php');

$tnef = new tnef_decoder;
$tnef_arr $tnef->decompress($winmail_dat);
print_r($tnef_arr);
?>

$tnef_arr will contain an array with the content of winmail.dat

gesti at gmx dot com (2012-06-22 11:10:00)

How to give more then one option in the "options" parameter:
It took me some time to realize how easy it is, so just in case some one else would be puzzled at this point:
<?php
imap_fetchbody
($imap_stream$msg_number$sectionFT_UID FT_PEEK);
?>

caevan at amkd dot com dot au (2012-06-01 02:52:24)

I tried using the function add_part_to_array below and noticed a few errors were thrown. If there are no 'parts' in the structure then if (sizeof($obj->parts) > 0) will throw an error. As well $prefix is not defined here is the code I have updated. I have left the original lines commented out. I have tested reading emails from a gmail account and so far so good.

<?php

// Sub function for create_part_array(). Only called by create_part_array() and itself. 
function add_part_to_array($obj$partno, & $part_array) {
    
$part_array[] = array('part_number' => $partno'part_object' => $obj);

   if (
$obj->type == 2) { // Check to see if the part is an attached email message, as in the RFC-822 type
//        if (sizeof($obj->parts) > 0) {    // Check to see if the email has parts
    
if(array_key_exists('parts',$obj){
            foreach (
$obj->parts as $count => $part) {
                
// Iterate here again to compensate for the broken way that imap_fetchbody() handles attachments
                
if (sizeof($part->parts) > 0) {
                    foreach (
$part->parts as $count2 => $part2) {
                        
add_part_to_array($part2$partno.".".($count2+1), $part_array);
                    }
                }else{    
// Attached email does not have a seperate mime attachment for text
                    
$part_array[] = array('part_number' => $partno.'.'.($count+1), 'part_object' => $obj);
                }
            }
        }else{    
// Not sure if this is possible
//            $part_array[] = array('part_number' => $prefix.'.1', 'part_object' => $obj);
            
$part_array[] = array('part_number' => $partno.'.1''part_object' => $obj);
        }
    }else{    
// If there are more sub-parts, expand them out.
//        if (sizeof($obj->parts) > 0) {
                    
if(array_key_exists('parts',$obj)){
            foreach (
$obj->parts as $count => $p) {
                
add_part_to_array($p$partno.".".($count+1), $part_array);
            }
        }
    }
}
?>

arkop at hotmail dot fr (2011-12-21 02:43:15)

Here is a function to display the accents well when retrieving the contents of an email (gmail) :

<?php
function ReplaceImap($txt) {
  
$carimap = array("=C3=A9""=C3=A8""=C3=AA""=C3=AB""=C3=A7""=C3=A0""=20""=C3=80""=C3=89");
  
$carhtml = array("é""è""ê""?""?""à""&nbsp;""?""?");
  
$txt str_replace($carimap$carhtml$txt);

  return 
$txt;
}

$mbox imap_open("{imap.gmail.com:993/imap/ssl}INBOX""login""pass");
$no 5// Mail to show (mail number)

$text imap_fetchbody($mbox$no1);
$text imap_utf8($text);
$text ReplaceImap($text);
$text nl2br($text);

echo 
$text;
?>

I hope it will help ;)

(Sorry for my english, i'm french)

atamido at gmail dot remove dot com (2009-10-03 11:32:11)

The previous post contains a copy/paste error and a little added complexity.  The first function should look like this:

<?php
function create_part_array($struct) {
    if (
sizeof($struct->parts) > 0) {    // There some sub parts
        
foreach ($struct->parts as $count => $part) {
            
add_part_to_array($part, ($count+1), $part_array);
        }
    }else{    
// Email does not have a seperate mime attachment for text
        
$part_array[] = array('part_number' => '1''part_object' => $struct);
    }
   return 
$part_array;
}
?>

atamido at gmail dot remove dot com (2009-02-17 22:54:53)

imap-fetchbody() will decode attached email messages inline with the rest of the email parts, however the way it works when handling attached email messages is inconsistent with the main email message.

With an email message that only has a text body and does not have any mime attachments, imap-fetchbody() will return the following for each requested part number:

(empty) - Entire message
0 - Message header
1 - Body text

With an email message that is a multi-part message in MIME format, and contains the message text in plain text and HTML, and has a file.ext attachment, imap-fetchbody() will return something like the following for each requested part number:

(empty) - Entire message
0 - Message header
1 - MULTIPART/ALTERNATIVE
1.1 - TEXT/PLAIN
1.2 - TEXT/HTML
2 - file.ext

Now if you attach the above email to an email with the message text in plain text and HTML, imap_fetchbody() will use this type of part number system:

(empty) - Entire message
0 - Message header
1 - MULTIPART/ALTERNATIVE
1.1 - TEXT/PLAIN
1.2 - TEXT/HTML
2 - MESSAGE/RFC822 (entire attached message)
2.0 - Attached message header
2.1 - TEXT/PLAIN
2.2 - TEXT/HTML
2.3 - file.ext

Note that the file.ext is on the same level now as the plain text and HTML, and that there is no way to access the MULTIPART/ALTERNATIVE in the attached message.

Here is a modified version of some of the code from previous posts that will build an easily accessible array that includes accessible attached message parts and the message body if there aren't multipart mimes.  The $structure variable is the output of the imap_fetchstructure() function.  The returned $part_array has the field 'part_number' which contains the part number to be fed directly into the imap_fetchbody() function.

<?php
function create_part_array($structure$prefix="") {
    
//print_r($structure);
    
if (sizeof($structure->parts) > 0) {    // There some sub parts
        
foreach ($structure->parts as $count => $part) {
            
add_part_to_array($part$prefix.($count+1), $part_array);
        }
    }else{    
// Email does not have a seperate mime attachment for text
        
$part_array[] = array('part_number' => $prefix.'1''part_object' => $obj);
    }
   return 
$part_array;
}
// Sub function for create_part_array(). Only called by create_part_array() and itself. 
function add_part_to_array($obj$partno, & $part_array) {
    
$part_array[] = array('part_number' => $partno'part_object' => $obj);
    if (
$obj->type == 2) { // Check to see if the part is an attached email message, as in the RFC-822 type
        //print_r($obj);
        
if (sizeof($obj->parts) > 0) {    // Check to see if the email has parts
            
foreach ($obj->parts as $count => $part) {
                
// Iterate here again to compensate for the broken way that imap_fetchbody() handles attachments
                
if (sizeof($part->parts) > 0) {
                    foreach (
$part->parts as $count2 => $part2) {
                        
add_part_to_array($part2$partno.".".($count2+1), $part_array);
                    }
                }else{    
// Attached email does not have a seperate mime attachment for text
                    
$part_array[] = array('part_number' => $partno.'.'.($count+1), 'part_object' => $obj);
                }
            }
        }else{    
// Not sure if this is possible
            
$part_array[] = array('part_number' => $prefix.'.1''part_object' => $obj);
        }
    }else{    
// If there are more sub-parts, expand them out.
        
if (sizeof($obj->parts) > 0) {
            foreach (
$obj->parts as $count => $p) {
                
add_part_to_array($p$partno.".".($count+1), $part_array);
            }
        }
    }
}
?>

atamido at gmail dot remove dot com (2009-02-02 11:50:57)

If you download an attachment labeled "winmail.dat" or "win.dat", or with the mime-type of "APPLICATION/MS-TNEF", this is a Microsoft Transport Neutral Encapsulation Format file.  It is a proprietary method for encoding several files together in a single file.  AFAIK only Outlook sends it with its default setting of sending emails in Rich Text Format.

As of PHP 5.2 there is no internal method of breaking apart these attachments.

There are external command line utilities that can be called from PHP.  Alternately, it is possible to decode these files entirely in PHP.  It appears that all current libraries are based on a plugin written by Graham Norbury for Squirrel Mail.  The only ones I've seen are in IlohaMail, Telean, Horde-Imp, and NaSMail.  The only one that I know that will also decode the RTF message is from NaSMail.

To use the NaSMail code, download the "TNEF Attachment Decoder" plugin and extract it to 
plugins/attachment_tnef/

Then use this bit of code:
<?php
include_once('plugins/attachment_tnef/constants.php');
include_once(
'plugins/attachment_tnef/functions.php');
include_once(
'plugins/attachment_tnef/class/tnef.php');

// $tnef is a binary variable containing only the contents of winmail.dat
$attachment = &new TnefAttachment($tnef_debug);
$result $attachment->decodeTnef($tnef);
$tnef_files = &$attachment->getFilesNested();
print_r($tnef_files); // See the format of the returned array
?>

fortega dot no spam plz at uamericas dot net (2008-04-24 13:37:52)

To fetch the body of a "sub part" do the following thing:
<?php
$partno 
"2.1"   // The first part of the second part

print_r(imap_fetchbody($mbox$msgno$partno));
// TODO: replace print_r for the proper function
?>

And remember... you can fetch the structure with
<?php
imap_fetchstructure
($mbox$msgno);
?>
then iterate the array of parts fetching the body.

anonymous lazy person (2008-03-22 08:51:07)

Expanding on a comment below about using munpack to extract attachments, here's a lazy person's function that extracts attachments from mail with $msg_number from $mailbox and writes them to $dir. It returns an array of filenames or false if there are no attachments.
function writeAttachmentsToDisk($mailbox, $msg_number, $dir){

if (!file_exists($dir)){
mkdir($dir);
}
$filename = "tmp.eml";
$email_file = $dir."/".$filename;
// write the message body to disk
imap_savebody ($mailbox, $email_file, $msg_number);
$command = "munpack -C $dir -fq $email_file";
// invoke munpack which will
// write all the attachments to $dir
exec($command,$output);
// if($output[0]!='Did not find anything to unpack from $filename') {
$found_file = false;
foreach ($output as $attach) {
$pieces = explode(" ", $attach);
$part = $pieces[0];
if (file_exists($dir.$part)){
$found_file = true;
$files[] = $part;
}
}
if (!$found_file){
//echo ("\nMail.php : no files found - cleaning up. ");
// didn't find any output files - delete the directory and email file
unlink($email_file);
rmdir($dir);
return false;
}
else {
// found some files- just delete the email file
unlink($email_file);
return $files;
}
}

tom at tomwardrop dot com (2008-03-12 23:08:07)

If text has been encoded as quoted-printable (most body text is encoded as this), it must be decoded for it to be displayed correctly (without '=', '=20' and other strange text chunks all through the string).
To decode, you can use the following built-in php function...
quoted_printable_decode($string)
Hopefully I've just saved a few people from having to do a preg_replace on there email bodies.

bryn (2008-01-11 11:58:33)

An alternative to munpack for rfc822 messages is ripmime http://www.pldaniels.com/ripmime/
It lets you pass it the rfc822 attachment (usually something.eml) and it recursively writes out attachments (and text and html files)

ted at qtis dot co dot nz (2007-08-18 13:02:38)

Here's simple way of extending Makusnospam's little routine to flatten the entire message into an array which can be useful to quickly find the body and attachments just by walking through the array elements.
function create_part_array($structure, $prefix="") {
$part_array = array();
if (sizeof($structure->parts) > 0) {
foreach ($structure->parts as $count => $part) {
add_part_to_array($part, $prefix.($count+1), $part_array);
}
}

return $part_array;
}
function add_part_to_array($obj, $partno, & $part_array) {
if ($obj->type == TYPEMESSAGE) {
parse_message($obj->parts[0], $partno.".");
}
else {
if (sizeof($obj->parts) > 0) {
foreach ($obj->parts as $count => $p) {
add_part_to_array($p, $partno.".".($count+1), $part_array);
}
}
}

$part_array[] = array('part_number' => $partno, 'part_object' => $obj);
}

phpnetlover at yoz dot us (2007-04-19 22:15:26)

Hi everyone
I have been inspecting the RFC's and the answer to what to display is not like Musawir Ali in 2 areas
1- You can not rely on disposition being present, not all mail software composes mail to standard, and if you would just take a quick look at the RFC's you will find out that someone can send you email where your solution will fail even though the mail is "within standards"
2- When you are presented with Alternative-multipart, assuming you will find one text-plain and one text-html, you should NOT be looking for HTML then TEXT, the last mentioned subtype is the most loyal to the original composition, you check if you can support the last, if not you simply go one step back and see the one before it, if your client supports it, you take that, and so on, this is how Alternative works, Just because HTML is best colored does not mean we should chose that, we are looking for the closest representation of the original and not for any in specific

anonymous at coward dot village (2007-02-22 11:08:29)

A very easy way to handle attachments is just using munpack, with a subdirectory called attachments chmod it to 777 and then use the following bit of code (with mpack installed) on the MIME encoded body:

<?php
//email MIME body in $input
file_put_contents("attachments/body.eml",$input);
$command "munpack -C attachments -fq body.eml";
exec($command,$output);
if(
$output[0]!='Did not find anything to unpack from body.eml') {
    foreach (
$output as $attach) {
        
$pieces explode(" "$attach);
        
$part $pieces[0];
        echo 
"<a href=\"attachments/$part\">$part</a><br>";
        }
    }
?>

web at i-ps dot net (2007-02-05 10:35:07)

I had an issue with the content that was returned by imap_fetchbody - either the function itself, or the mail-server, was inserting "=\r\n" at points into the text body returned. This may depend upon the content type (i.e. plain text / csv, as opposed to something like a Word document), but you may need to do something like:
$body = preg_replace("/=(\r?)\n/", '', imap_fetchbody($mailbox, $message, $part));

jbr at ya-right dot com (2006-12-14 20:38:08)

Musawir Ali comment is not totally correct, ifdisposition= 1 will never tell you 100% if there is an attachment. You must look at (ifdparameters, ifparameters) if (1) of them is greater then (0), then you need to look inside (parameters), looking at each ($obj->parameters) and check the (attribute) for (NAME, FILENAME), also be sure to set them to upper or lower case before doing your testing. That's the only way to know if you have an attachment. inline attachments will have $obj->ifid equal to 1, the $obj->id will contain the (cid). If $obj->ifid equals 0 then it's also an attachment (file type) if you have (NAME, FILENAME) as the current parameters (attribute).

<?php
        $name 
'';

        if ( 
$parent->ifdparameters && sizeof $parent->dparameters ) > )
        {
            foreach ( 
$parent->dparameters as $child )
            {
                if ( 
strtolower $child->attribute ) == 'name' || strtolower $child->attribute ) == 'filename' )
                {
                    
$name strtolower $child->value );
                }
            }
        }

        if ( empty ( 
$name ) )
        {
            if ( 
$parent->ifparameters && sizeof $parent->parameters ) > )
            {
                foreach ( 
$parent->parameters as $child )
                {
                    if ( 
strtolower $child->attribute ) == 'name' || strtolower $child->attribute ) == 'filename' )
                    {
                        
$name strtolower $child->value );
                    }
                }
            }
        }
?>

$parent is derived from imap_fetchstructure(), as a child object if $obj->parts is set or as the $parent if $obj->parts is not set!

Musawir Ali (2006-07-12 22:04:46)

For those of you trying to create a "flexible" email reader, I suggest doing the following.
Firstly, instead of going through each part of the email and decoding it, I suggest you go in a specific order.
1) First go through all the parts and search for the part that has subtype=='HTML'. If found, use that as your message body, else go to Step 2.
2) If HTML component not found, search all parts for subtype=='PLAIN'. If found, use that as your message body else print out an error message (this should never occur).
3) At this point, you already have the main body of the email that you should display. The next thing to do is to find all the attachments. You do this by going through all parts, searching for the parts with ifdisposition==1 (there can be multiple).
This is the way I did my email reader program and it works perfectly. I started off by using the methods recommended in a lot of webpages (i.e. going through the parts tree like 1.2.1, 1, 2, etc) but the problem is the message body is never in some fixed part! Sometimes its in 1, somtimes 1.1.2, sometimes 2, and sometimes in some totally unexpected place! So my approach was to "search" for the parts that I'm interested. Hope this helps. I also managed to crack the problem with emails containing embedded images. I will probably write a tutorial on that soon.

se at designlinks dot net (2005-03-03 03:36:46)

If you insist on using imap_fetchbody() to retrieve a mail body that doesn't contain 'parts' [normally you'd use imap_body() ], then note that the header text is in part '0' and the body text in part '1'.
So, imap_fetchbody($mbox,$msg,'0') will return the header and imap_fetchbody($mbox,$msg,'1') will return the body text.

guru at php dot net (2004-10-04 08:50:42)

After many battles with the imap extension I took it upon myself to write my own implementation using sockets. Below is what I came up with, and hopefully it will be usefull to others as well. I know that there are some parts of this that can be tweaked, however I will leave that for you to do. Use/abuse/mutilate this as you wish (no license).
(Note: I am not placing the source here since it is well over 1900 lines ~48KB)
http://www.nutextonline.com/cimap.phps
If enough people find this usefull I will continue to improve it and eventually commit it (or have it committed) to pear.
Also worth noting is the fact that you can use the imap extensions on mbox format mailboxes. A combination of this class with the imap extension would certainly make a great combination of done correctly.

Adam (2004-09-27 23:12:22)

It took me a while to figure out how part id's(numbers) are assigned to different parts of a message. After getting a few AOL e-mails that had a semi-complex structure I was finally able to break it down.
0 multipart/mixed
1 multipart/alternative
1.1 text/plain
1.2 text/html
2 message/rfc822
2 multipart/mixed
2.1 multipart/alternative
2.1.1 text/plain
2.1.2 text/html
2.2 message/rfc822
2.2 multipart/alternative
2.2.1 text/plain
2.2.2 text/html
Hopefully this will help others get the different body parts of a message.

sales at nocwizard dot com (2004-09-05 17:59:07)

I'm adding this for those of you like me who are scouring the web looking for code to break down a message. These two functions will break down a multi-part and non multi-part message and return the contents of the message in the array $message. It doesn't do attachments. This assumes you've already opened the mailbox and pass it VIA the $mbox.
function retrieve_message($mbox, $messageid)
{
$message = array();

$header = imap_header($mbox, $messageid);
$structure = imap_fetchstructure($mbox, $messageid);
$message['subject'] = $header->subject;
$message['fromaddress'] = $header->fromaddress;
$message['toaddress'] = $header->toaddress;
$message['ccaddress'] = $header->ccaddress;
$message['date'] = $header->date;
if (check_type($structure))
{
$message['body'] = imap_fetchbody($mbox,$messageid,"1"); ## GET THE BODY OF MULTI-PART MESSAGE
if(!$message['body']) {$message['body'] = '[NO TEXT ENTERED INTO THE MESSAGE]\n\n';}
}
else
{
$message['body'] = imap_body($mbox, $messageid);
if(!$message['body']) {$message['body'] = '[NO TEXT ENTERED INTO THE MESSAGE]\n\n';}
}

return $message;
}
function check_type($structure) ## CHECK THE TYPE
{
if($structure->type == 1)
{
return(true); ## YES THIS IS A MULTI-PART MESSAGE
}
else
{
return(false); ## NO THIS IS NOT A MULTI-PART MESSAGE
}
}

noose (at) nospam (dot) tweak (dot) pl (2004-06-20 04:04:14)

Sorry for my english....

for read the attachment's:

<?
 foreach ($_GET as $k => $v)
 {
     $$k = $v;
 }
 $login = 'mylogin';
 $password = 'mypassword';
 $host = '{myhost:110/pop3}';

$mbox = imap_open("$host", "$login", "$password");
$struckture = imap_fetchstructure($mbox, $id);
$message = imap_fetchbody($mbox,$id,$part);    
$name = $struckture->parts[$part]->dparameters[0]->value;
$type = $struckture->parts[$part]->typee;
############## type
if ($type == 0)
{
    $type = "text/";
}
elseif ($type == 1)
{
    $type = "multipart/";
}
elseif ($type == 2)
{
    $type = "message/";
}
elseif ($type == 3)
{
    $type = "application/";
}
elseif ($type == 4)
{
    $type = "audio/";
}
elseif ($type == 5)
{
    $type = "image/";
}
elseif ($type == 6)
{
    $type = "video";
}
elseif($type == 7)
{
    $type = "other/";
}
$type .= $struckture->parts[$part]->subtypee;
######## Type end

header("Content-typee: ".$type);
header("Content-Disposition: attachment; filename=".$name);

######## coding
$coding = $struckture->parts[$part]->encoding;
if ($coding == 0)
{
    $message = imap_7bit($message);
}
elseif ($coding == 1)
{
    $wiadomsoc = imap_8bit($message);
}
elseif ($coding == 2)
{
    $message = imap_binary($message);
}
elseif ($coding == 3)
{
    $message = imap_base64($message);
}
elseif ($coding == 4)
{
    $message = quoted_printable($message);
}
elseif ($coding == 5)
{
    $message = $message;
}
echo $message;
########## coding end
 imap_close($mbox);
?>

jsimlo yahoo com (2004-05-24 13:38:17)

this may be the way, how to obtain all those part_numbers.... even when a message contains another message attached, and it contains another message attached...

<?
 $parttypes = array ("text", "multipart", "message", "application", "audio", "image", "video", "other");
 function buildparts ($struct, $pno = "") {
   global $parttypes;
   switch ($struct->type):
     case 1:
       $r = array (); $i = 1;
       foreach ($struct->parts as $part)
         $r[] = buildparts ($part, $pno.".".$i++);

       return implode (", ", $r);
     case 2: 
       return "{".buildparts ($struct->parts[0], $pno)."}";
     default:
       return '<a href="?p='.substr ($pno, 1).'">'.$parttypes[$struct->type]."/".strtolower ($struct->subtype)."</a>";
   endswitch;
 }

  $struct = imap_fetchstructure ($pop3mbox, $msguid, FT_UID);
  echo buildparts ($struct);
?>

it will print something like: 

<a href="?p=1">text/plain</a>, {<a href="?p=2.1">text/plain</a>, <a href="?p=2.2">text/html</a>}

Sito (2004-05-24 04:54:17)

Better, a fix on a fix... ;)
function read_all_parts($uid){
global $mime,$ret_info,$enc;
$mime = array("text","multipart","message","application","audio",
"image","video","other","unknow");
$enc = array("7BIT","8BIT","BINARY","BASE64",
"QUOTED-PRINTABLE","OTHER");

$struct = imap_fetchstructure( $this -> Link, $uid );
$ret_info = array();
function scan($struct,$subkey){
global $mime,$enc,$ret_info;

foreach($struct as $key => $value){

if($subkey!=0){
$pid = $subkey.".".($key+1); }
else { $pid = ($key+1); }

$ret_info[]['pid'] = $pid;
$ret_info[key($ret_info)]['type'] = $mime["$value->type"];
$ret_info[key($ret_info)]['encoding'] = $enc["$value->encoding"];
next($ret_info);

if(($value->parts)!= null) {scan($value->parts,$pid); }
}
}
if(!is_null($struct->parts))
{
scan($struct->parts,0);
}
else
{
print_r($struct);
echo("<hr>");
$ret_info[]['pid']=1;
$ret_info[key($ret_info)]['type']=$mime["$struct->type"];
$ret_info[key($ret_info)]['encoding']=$enc["$struct->encoding"];
}
return $ret_info;
}

php at NOSPAM dot sibyla dot cz (2004-04-04 15:56:10)

// $uid - msg number
function read_all_parts($uid){
global $mime,$ret_info,$enc;
$mime = array("text","multipart","message","application","audio",
"image","video","other","unknow");
$enc = array("7BIT","8BIT","BINARY","BASE64",
"QUOTED-PRINTABLE","OTHER");

$struct = imap_fetchstructure( $this -> Link, $uid );
$ret_info = array();
function scan($struct,$subkey){
global $mime,$enc,$ret_info;

foreach($struct as $key => $value){

if($subkey!=0){
$pid = $subkey.".".($key+1); }
else { $pid = ($key+1); }

$ret_info[]['pid'] = $pid;
$ret_info[key($ret_info)]['type'] = $mime["$value->type"];
$ret_info[key($ret_info)]['encoding'] = $enc["$value->encoding"];
next($ret_info);

if(($value->parts)!= null) {scan($value->parts,$pid); }
}

}
scan($struct->parts,0);
return $ret_info;
}

asfd at aasdfa dot com (2003-08-30 02:48:56)

PLEASE DOCUMENT THIS POST AND SAVE US SOME TIME! :)
ac at artcenter dot ac
17-Feb-2002 04:24
Lets say your email has this structure:
1 multipart
plain
html
2 x-vcard
and... you can't seem to figure out how to get either plain or HTML part of the multipart message? have you been going through all the trouble looking for a PHP mime parser? well here is a simple solution which SHOULD BE documented in this manual. From example above, if you want to get the plain part of the "multipart" message do this:
$text=imap_fetchbody($mbox,$msg_num,"1.1");
all you do is instead of part number 1, put 1.1 or to get the HTML part put 1.2
EASY!

ulrich at kaldamar dot de (2003-04-30 04:54:03)

The function imap_fetchbody() seems uncapable of getting subordinate parts of a message/rfc822-part. I had problems with getting an attachment that was forwarded in such a part, because the object given by imap_fetchstructure() would assume that the part was represented by the string "2.1.2.1.2".
So I wrote this set of functions which parses the raw message-body and creates an array with the struture corresponding to the structure given by imap_fetchstructure(). The function mail_fetchpart() (see below) will work on the array and return even those parts that I could not get with imap_fetchbody().
Example usage of this function: mail_fetchpart($mbox, 2, "2.1.2.1.2");
Note: If the message does not contain multiple pars, the body of the message can be accessed by the part-string "1".
I have more functions for parsing and decoding messages, just email me.
// get the body of a part of a message according to the
// string in $part
function mail_fetchpart($mbox, $msgNo, $part) {
$parts = mail_fetchparts($mbox, $msgNo);

$partNos = explode(".", $part);

$currentPart = $parts;
while(list ($key, $val) = each($partNos)) {
$currentPart = $currentPart[$val];
}

if ($currentPart != "") return $currentPart;
else return false;
}
// splits a message given in the body if it is
// a mulitpart mime message and returns the parts,
// if no parts are found, returns false
function mail_mimesplit($header, $body) {
$parts = array();

$PN_EREG_BOUNDARY = "Content-Type:(.*)boundary=\"([^\"]+)\"";
if (eregi ($PN_EREG_BOUNDARY, $header, $regs)) {
$boundary = $regs[2];
$delimiterReg = "([^\r\n]*)$boundary([^\r\n]*)";
if (eregi ($delimiterReg, $body, $results)) {
$delimiter = $results[0];
$parts = explode($delimiter, $body);
$parts = array_slice ($parts, 1, -1);
}

return $parts;
} else {
return false;
}


}
// returns an array with all parts that are
// subparts of the given part
// if no subparts are found, return the body of
// the current part
function mail_mimesub($part) {
$i = 1;
$headDelimiter = "\r\n\r\n";
$delLength = strlen($headDelimiter);

// get head & body of the current part
$endOfHead = strpos( $part, $headDelimiter);
$head = substr($part, 0, $endOfHead);
$body = substr($part, $endOfHead + $delLength, strlen($part));

// check whether it is a message according to rfc822
if (stristr($head, "Content-Type: message/rfc822")) {
$part = substr($part, $endOfHead + $delLength, strlen($part));
$returnParts[1] = mail_mimesub($part);
return $returnParts;
// if no message, get subparts and call function recursively
} elseif ($subParts = mail_mimesplit($head, $body)) {
// got more subparts
while (list ($key, $val) = each($subParts)) {
$returnParts[$i] = mail_mimesub($val);
$i++;
}
return $returnParts;
} else {
return $body;
}
}
// get an array with the bodies all parts of an email
// the structure of the array corresponds to the
// structure that is available with imap_fetchstructure
function mail_fetchparts($mbox, $msgNo) {
$parts = array();
$header = imap_fetchheader($mbox,$msgNo);
$body = imap_body($mbox,$msgNo, FT_INTERNAL);

$i = 1;

if ($newParts = mail_mimesplit($header, $body)) {
while (list ($key, $val) = each($newParts)) {
$parts[$i] = mail_mimesub($val);
$i++;
}
} else {
$parts[$i] = $body;
}
return $parts;

}

bubblocity at yahoo dot com (2003-03-24 20:18:25)

This is a well overdue addendum to the code submitted on
14-Jan-2002 02:58. This function was called inside the GetParts function:
function concat_ws($separator, $str1, $str2){
if(strlen($str1) && strlen($str2)){
return $str1 . $separator . $str2;
}
else if (strlen($str1)){
return $str1;
}
else if (strlen($str2)){
return $str2;
}
else return '';

}

robc at gmx dot de (2002-12-31 22:26:28)

// This prints all important part numbers:
function mime_scan_multipart(&$parts, $part_number)
{
$n = 1;
foreach ($parts as $obj) {
if ($obj->type == 1)
mime_scan_multipart($obj->parts, "$part_number$n.");
else
echo "$part_number$n\n";
$n++;
}
}
function mime_scan(&$obj)
{
if ($obj->type == 1)
mime_scan_multipart($obj->parts, "");
else
echo "1";
}
...
$obj = imap_fetchstructure($fd, $id);
mime_scan($obj);

markusNOSPAM at broede dot NO_SPAM dot de (2002-08-12 20:54:56)

Maybe you prefer a short and recursive way to parse a message
and get the part numbers built:
-------------------------------------------------------------
function parse_message($obj, $prefix="") {
/* Here you can process the data of the main "part" of the message, e.g.: */
do_anything_with_message_struct($obj);
if (sizeof($obj->parts) > 0)
foreach ($obj->parts as $count=>$p)
parse_part($p, $prefix.($count+1));
}
function parse_part($obj, $partno) {
/* Here you can process the part number and the data of the parts of the message, e.g.: */
do_anything_with_part_struct($obj,$partno);
if ($obj->type == TYPEMESSAGE)
parse_message($obj->parts[0], $partno.".");
else
if (sizeof($obj->parts) > 0)
foreach ($obj->parts as $count=>$p)
parse_part($p, $partno.".".($count+1));
}
/* Let's say, you have an already opened mailbox stream $mbox
and you like to parse through the first message: */
$msgno = 1;
parse_message(imap_fetchstructure($mbox,$msgno));

sarachaga at yahoo dot com (2002-03-04 11:23:38)

For those guys trying to extract a message/rfc822 parts correctly here is a hint:
As you may note, if you recurse over the structure object returned by imap_fetchstructure, when you reach the message/rfc822 you find that the message itself counts as a part too, so an attachment in that message should be 2.1.2 (the .1. is the whole rfc822 msg), but if you use that part number in imap_fetchbody you get nothing.
What i did is: my recursing function checks if the part/subtype of a particular part is message/rfc822, and only in that case i do not concatenate the .1 to the part number, because as far as i know, this only happens with this kind of message. And for all the other parts (non rfc822) it concats the dot-partnumber.

ac at artcenter dot ac (2002-02-17 17:24:25)

Lets say your email has this structure:
1 multipart
plain
html
2 x-vcard
and... you can't seem to figure out how to get either plain or HTML part of the multipart message? have you been going through all the trouble looking for a PHP mime parser? well here is a simple solution which SHOULD BE documented in this manual. From example above, if you want to get the plain part of the "multipart" message do this:
$text=imap_fetchbody($mbox,$msg_num,"1.1");
all you do is instead of part number 1, put 1.1 or to get the HTML part put 1.2
EASY!

bubblocity at yahoo dot com (2002-01-14 13:58:49)

If you are trying to fetch the body part and don't know what to fetch,
here is a function that will return all the body parts as a single string with each part separated by '|' character.
Followed by a fuction which will retrieve the structure of that part.
You can then parse the return string by explode() and call imap_fetchbody() on each of the parts.
Chunks of this code was stolen from the following site:
http://www.bitsense.net/PHPNotes/IMAP/imap_fetchstructure.asp
<pre>
#Function Gets all the subparts , but does not get part: ''
function GetParts($this_part, $part_no) {
//If it is type message(2)=msg envelope,
//Not sure about this assumption : the if statement
//double check with RFC822 on this one.
if($this_part->type==2){
//and there is only 1 subpart of the envelope
//and that subpart is multipart
//otherwise will generate excessive '.1' and
//send wrong part_no to imap_fetchbody
if($this_part->parts[0]->type==1){
$this_part=$this_part->parts[0];
}
}
if (count($this_part->parts)>0) {
for ($i = 0; $i < count($this_part->parts); $i++) {
if ($part_no != "") {
$newpartno = $part_no . '.' . ($i +1);
}
else $newpartno = $i+1;

$partstringary[$i] =
GetParts($this_part->parts[$i], $newpartno);
}//for
$partstring = implode('|', $partstringary);
}//if
$partstring = concat_ws('|', $part_no , $partstring);
//echo $partstring ;
return $partstring;
}
#########################################
#Companion function go to GetParts();
#Given the partno - returns the structure
#########################################
function GetSubPartStructure($mbox, $msgno, $partno){

$msg_struct = imap_fetchstructure($mbox, $msgno);
$partsary = explode ('.', $partno);
$subpartstruct = $msg_struct;
for ($i=0; $i< count($partsary); $i++){
//Not sure about this, if assumption
// you should probably double check with RFC822 on this one.
if($subpartstruct->type==2){
if($subpartstruct->parts[0]->type==1){
$subpartstruct=$subpartstruct->parts[0];
}
}
$subpartstruct = $subpartstruct->parts[$partsary[$i]-1];
}
return $subpartstruct;
}
function decodemsg($msgstring, $encoding){
//Write your own function to decode,
//or lots of examples within PHP already.
return $decodemsg;
}
#Usage:
$msg_struct = imap_fetchstructure($mbox, $msgno);
$msgparts= GetParts($msg_struct, $part_no);
$partsary = explode($msgparts, '|');
for($i=0; $i<count($parsary);$i++){
$substruct = GetSubPartStructure($mbox, $msgno, $partsary[$i]);
if($substruct->type==''){
//then this is type TEXT
$msg = imap_fetchbody($mbox, $msgno, $msgpartsary[$i]);
//Do the decoding
$msg = decodemsg($msg, $struct->encoding);
echo $msg; //or do whatever you want with it.
}
else{ //Not TEXT
//Do whatever you want
//i.e. write the attachment...etc
}
}
</pre>

pmzandbergen at yahoo dot com (2001-07-10 07:56:56)

Nice function above. However, there are some webmail (normaly plain text) services like you which don't use structure type 'ATTACHMENT' with the attachments, but 'INLINE' (also plain text is called like this). Just replace
if (strtoupper ($structure->disposition) == "ATTACHMENT"){
with
if (strtoupper ($structure->disposition) == "ATTACHMENT" || strtoupper ($structure->disposition) == "INLINE" && strtoupper ($structure->subtype) != "PLAIN") {
But remember, when uou send a message with plaintext & attachment, also the plaintext is an attachment

rfinnie at kefta dot com (2000-12-14 14:23:45)

With regard to message/rfc822 parts, it appears that the IMAP c-client that PHP uses does not follow the IMAP RFC (#2060) correctly. The RFC specifies that to grab the headers for a message/rfc822 part, you would request part "2.HEADER" (assuming 2 is your part number), and the full text of the part would be "2.TEXT". Instead, "2.0" will grab the headers, and just "2" will get the text.

cleong at organic dot com (2000-04-04 21:19:32)

Here's a routine that yields the part of a message with a particular MIME type:

<?php
function get_mime_type(&$structure) {
    
$primary_mime_type = array("TEXT""MULTIPART""MESSAGE""APPLICATION""AUDIO""IMAGE""VIDEO""OTHER");
    if(
$structure->subtype) {
         return 
$primary_mime_type[(int) $structure->type] . '/' $structure->subtype;
     }
     return 
"TEXT/PLAIN";
}

function 
get_part($stream$msg_number$mime_type$structure false$part_number false) {
    if (!
$structure) {
         
$structure imap_fetchstructure($stream$msg_number);
     }
    if(
$structure) {
         if(
$mime_type == get_mime_type($structure)) {
              if(!
$part_number) {
                   
$part_number "1";
               }
              
$text imap_fetchbody($stream$msg_number$part_number);
              if(
$structure->encoding == 3) {
                   return 
imap_base64($text);
               } else if (
$structure->encoding == 4) {
                   return 
imap_qprint($text);
               } else {
                   return 
$text;
            }
        }
         if (
$structure->type == 1) { /* multipart */
              
while (list($index$sub_structure) = each($structure->parts)) {
                if (
$part_number) {
                    
$prefix $part_number '.';
                }
                
$data get_part($stream$msg_number$mime_type$sub_structure$prefix . ($index 1));
                if (
$data) {
                    return 
$data;
                }
            }
        }
    }
    return 
false;
}

// get plain text
$data get_part($stream$msg_number"TEXT/PLAIN");
// get HTML text
$data get_part($stream$msg_number"TEXT/HTML");
?>

Right now only the first part with the matching MIME type is returned. A more useful version would create an array and return all matching parts (for GIFs, for instance).

易百教程